EN
12
USB
To use USB mode, insert a USB drive into the USB port at the back of the speaker
(Ref.13). The speakers will sound with 2 short beeps to indicate that USB mode is
active, and the ‘USB/OPT’ mode indicator light (Ref.7) will light up blue. If necessary,
select ‘USB’ mode using the ‘Mode’ button (Ref.24)/(Ref.3).
SD
To use SD mode, insert a SD/TF card into the SD port at the back of the speaker
(Ref.14). The speakers will sound with 3 short beeps to indicate that SD mode is
active, and the ‘SD’ mode indicator light (Ref.7) will light up red. If necessary, select
‘SD’ mode using the ‘Mode’ button (Ref.24)/(Ref.3).
Maximum storage compatibility for USB and SD/TF cards: 64GB.
Controls and Functions
Please see page 7.
USB & SD CARD MODE
To Next Page
Loading...
Need help?
General
