Why does my MAJORITY Portable Radio have static or cut-out sound?
If you are experiencing static sound on FM or burbling/intermittent cut-out on DAB, it could be due to low signal reception. Try adjusting the aerial or moving the unit to a location with a stronger signal. You may also want to rescan the stations or perform a factory reset.
How to fix no sound on my MAJORITY HISTON 2 Portable Radio?
If there is no sound, the station may not be tuned in properly. Rescan for available stations or manually scroll through the available stations to resolve this issue.
What to do if desired station is not found on MAJORITY Portable Radio?
If you cannot find the desired station, it might be due to a weak signal. Use the manual tune function and try rescanning in a different area.
Why does my MAJORITY HISTON 2 display 'No Service'?
If your radio displays 'No Service', it indicates there is no DAB coverage in your area or the reception is poor. Adjust the position of the aerial or move the unit to a location with a stronger signal.
How to set the time automatically on my MAJORITY Portable Radio?
To set the time and date automatically, turn on the system, switch to DAB radio, and let it scan. Alternatively, you can set these manually in the radio settings.
How to preset stations on MAJORITY HISTON 2 Portable Radio?
To preset stations, ensure that you are pressing and holding down the Preset button for 2-3 seconds to open the Preset Store settings. Remember, only press the button to open Preset Recall.
General| Type | Portable Radio |
|---|---|
| Bluetooth | Yes |
| FM Radio | Yes |
| AUX Input | Yes |
| USB Charging | Yes |
| Headphone Jack | Yes |
| Tuner Technology | Digital |
| Frequency Range | 87.5 - 108 MHz |
| Output Power | 5W |
| Features | Bluetooth, FM Radio, AUX Input |
| Power Source | Battery |
| Battery Type | Rechargeable Lithium Battery |
Details of the radio's side view ports and top view controls.
Lists the items included with the Majority Histon II Radio.
Information on how to obtain further assistance from the manufacturer's support team.
Steps to connect power, extend antenna, and turn on the radio for the first time.
Instructions for switching between DAB/FM modes and performing an initial station scan.
How to put the radio into standby mode or turn it off completely.
Procedure for scanning available DAB/DAB+ stations and rescanning if needed.
How to navigate through DAB stations and select one to listen.
Guide on saving favourite DAB stations and recalling them later.
How to tune into FM frequencies and search for stations.
Guide on saving favourite FM stations and recalling them later.
Step-by-step guide to manually set the radio's time.
Instructions for setting up Alarm 1 and Alarm 2 with time, volume, and tone.
Programming the radio to automatically turn off after a selected duration.
Solutions for common problems like no sound, static, or poor reception.
Fixes for station tuning difficulties and display errors like 'No Service'.
Troubleshooting for settings not saving or automatic time/date synchronization.
Key technical details including power, dimensions, weight, and connectivity.
Information on the standard warranty and how to register for an extended warranty.
Important precautions for safe operation, cleaning, and installation.
Warnings related to electricity, liquid, battery, and proper disposal.
To Next Page
