MAJORITY SIDNEY User Manual

8
Basic Operation
Instrucons Guide
Please note that the instructions within this manual will refer to
the radio button number e.g (Ref.*number*) in accordance to
the diagrams on pages 2-3.
Starting up your internet radio
Plug the adaptor connector into the back of the system labelled
‘DC in’ (Ref.) and turn the power on from the mains. The radio
will begin to power up and display a ‘MAJORITY’ screen.
Ensure the antenna (Ref.) is extended as far as possible. This
will enable you to get the best signal you can before going to
DAB and FM modes and beginning the scan.
After the Majority screen, you will be able to select your chosen
language by scrolling with the Navigation dial (Ref.). Select
your language by pressing down the dial.
If this is the rst time of using your radio, you will get the option
to set up your WiFi to stream Internet Radio with the message
“Would you like to congure network now?”. If you select YES,
your radio will begin to scan for nearby networks to connect to.
If you select NO then you can set this up later in conguration
settings.

MAJORITY SIDNEY Specifications

General

Brand	MAJORITY
Model	SIDNEY
Category	Receiver
Language	English