19
Arrange a CD song program
1. When the CD is put into ‘Stop’ on the machine (Ref.10) or
on the remote (Rem.14), you can program the CD player to
play songs in a particular order. Simply follow by pressing the
“Program” button on the remote (Rem.13) to step into the state
of programming.
2. Once in program settings, the display will show P1 001 to
display the rst song on the CD as 001. You can now choose
what song you would like as program number 001 by using the
‘<’ and ‘>’ buttons (Rem.8/17) to scroll through to the song you
would like to choose. Once on the chosen song for 001, press
the ‘Program’ button (Rem.13) to select, and be taken to choose
your next programmed song.
3. For the next song, the display will show P2 002 to show the
program 2. Now use the ‘<’ and ‘>’ buttons (Rem.8/17) to scroll
through to the song you would like to choose. Once on the
chosen song for program 2, press the ‘Program’ button (Rem.13)
to select, and be taken to choose your next programmed song.
On the display, the song number will show as 001 for CD song
number 1, 008 for CD song number 8, 010 for CD song number
10 etc.
4. After you have nished program song selection, press the
‘Play’ button (Rem.15) to play the songs which have been
programmed.
Press “Stop” button to exit the “Program” when programming.
When the Program playback is activated, press “Eject” or “Stop”
button twice, then it will exit the program playback mode.
Instrucons Guide
To Next Page
Loading...
Need help?
General
