10
Patch Ideas:
Transposition/Superimposition
Patch a sequence such as from Rene to the STO’s 1V/Oct input. Patch another sequence of a dierent speed, or control voltage
from a keyboard, to the Expo input. The two sequences will be “added” together for transposition. Variations would include:
clocking the transposing sequence at an odd division of the master clock, resulting in long periods between exact repetitions;
deriving the transposing sequence from the master sequence via sample and hold; tuning a square wave LFO to +/- 1V for double
octave leaps.
Dual Sync
Patch an audio-rate square or sawtooth wave to the STO’s S-Gate input, and another to the Sync input. The Sub output will be
“pseudo-synced” to a dierent frequency from the Sine and Variable outs. If the Sync sources are related, such as from two sides of
a DPO with Following engaged, so will be the STO’s outputs.
To Next Page
Loading...