11
Patch Ideas:
Key Tracking
Mult the control voltage in the 1V/Oct input to the Shape CV input and take output from Variable Wave Output. This results in
higher pitches having more harmonic content, similar to keyboard tracking on a low-pass lter.
Bassline
Patch a low-frequency square wave (or EOR/EOC gate from cycling MATHS, FUNCTION, or CONTOUR) to the S-Gate input, and take
output from SUB Out. Mult the square wave to the Clock input of a sequencer and patch the sequencer’s output to the STO
1V/Oct input. Adjust square wave pulse width (or MATHS/FUNCTION/CONTOUR’s Rise/Fall times) to change the length of “notes.”
To Previous Page
Loading...