67
MENU FUNCTIONS
SCANNER
Calibrate Camera: Runs the camera calibration portion of the MakerBot Digitizer
calibration routine.
Calibrate Turntable & Lasers: Runs the turntable and laser portions of the MakerBot
Digitizer calibration routine.
Align Lasers: Turns on both lasers for manual alignment.
Update Firmware: Walks you through the process of uploading new firmware to your
MakerBot Digitizer. If MakerWare for Digitizer is connected to the internet, it will notify you
when a firmware update becomes available.
New Scan: Brings you to MakerWare for Digitizer’s New Scan screen.
SERVICES
Restart Background Service: Allows you to restart Conveyor, the service that handles
MakerWare for Digitizer’s connection to the MakerBot Digitizer.
View Background Service Log: Opens the log file for Conveyor, the service that handles
MakerWare for Digitizer’s connection to the MakerBot Digitizer.
HELP
Online Help: Directs the user to online support documentation.
About MakerWare for Digitizer: Displays a dialog with version and copyright information.
On a Mac, this option will appear in the MakerWare for Digitizer menu.
REFERENCE
To Next Page
Loading...