1.2 Cautions
1.The nozzle temperature can reach temperatures greater than
200℃ while printing and remains hot for a period of time during
cool down after the completion of a print. Take caution while
removing your printed model - do not touch the nozzle with your
hand；
2.Please follow the instructions in the guide while operating this
machine. If you have any questions contact your reseller or the
MakerPi after-sales department；
3.If support material needs to be removed from the printed
model, please wear gloves so as not to be hurt by tools or the
support material during the clean-up process；
4.Reading the "User guide", while actually operating the
machine will be more conducive to your operation as you
become familiar with the printer；
5.If you encountered a problem with a print or a machine part,
please take a photo that represents the problem and another
with the machine identification number (the label at the bottom
back of the machine), and then contact our after-sales support
or your reseller；
6.The use of original factory filament is recommended；
7.If your machine does not power on check the power supply
under the machine and select the appropriate voltage for your
region.
To Next Page
Loading...
