Makey Makey Makey Go - User Manual

Makey Go, How to use:
1) Plug in USB
The lights on the GO will dance a little, then settle on Blue.
Blue = Right Click.
2) Close Popup Window (If Any)
Your computer may ask you to install drivers or do other setup. You can click cancel
or close the window.
3) Connect your object
Connect the alligator clip from your object to the Plus Sensor

Summary

Makey Go Basic Setup and Usage

Plug in USB

Connect the Makey Makey GO to your computer via USB. The lights indicate connection status.

Close Popup Window

Dismiss any driver installation or setup prompts from your computer.

Connect Your Object

Attach an alligator clip from your object to the Plus Sensor on the Makey Makey GO.

Calibrate and Play

Press the Play Button to recalibrate for the connected object and then interact.

Switch to Space Bar Mode

Tap the Gear Button to change functionality from left-click to space bar.

Advanced Features

Custom Key Mapping

Visit makeymakey.com/remap to change key commands triggered by the Makey Makey GO.

Sensitive Setting Adjustment

Press and hold the Play Button to adjust sensitivity for objects with poor conductivity.

Experimentation and Troubleshooting

Conductive Materials Guide

Lists various fruits, foods, plants, clays, graphite, and metal objects that can be used.

Connectivity Troubleshooting

Addresses issues like no light, green light, USB 3.0 ports, and basic signal testing.

Intermittent Connectivity Issues

Explains why connections might work sometimes and not others, focusing on conductivity and environment.

Makey Makey Makey Go Specifications

General

Brand	Makey Makey
Model	Makey Go
Category	Adapter
Language	English