Model 2702 2703
2702x1 2703x1
Blade diameter .......................................... 210 mm 255 mm
Hole (arbor) diameter ................................ 25 mm 25 mm
Cutting capacities ...................................... 90°: 68 mm 91 mm
45°: 47 mm 63 mm
Table size (W x L) ..................................... 686 mm x 560 mm 686 mm x 560 mm
No load speed (RPM) ............................... 4,600 4,600
Dimensions (L x W x H) ............................ 560 mm x 686 mm x 458 mm 560 mm x 686 mm x 458 mm
Net weight ................................................. 18 kg 18 kg
Due to the continuing program of research and development, the specifications herein are subject to change without
prior notice.
Note: Specifications may differ from country to country.
Power supply
The tool should be connected only to a power supply of the same voltage as indicated on the nameplate, and can only
be operated on single-phase AC supply. They are double-insulated in accordance with European Standard and can,
therefore, also be used from sockets without earth wire.
Table Saw
210 mm 2702
2702x1
255mm 2703
2703x1
SPECIFICATIONS
To Next Page
