Need help?Do you have a question about the Makita 4100NH2 and is the answer not in the manual?
Stay alert, use PPE, prevent unintentional starting, remove keys, maintain balance, dress properly, use dust extraction.
Ensure guard is attached and positioned correctly for safety. Keep operator and bystanders away from rotating wheel plane.
Use only recommended diamond cut-off wheels. Ensure rated speed matches tool. Use correct wheel flanges and arbors.
Inspect wheels for chips/cracks before use. Test run at max speed for one minute to detect damage.
Hold tool by insulated surfaces. Position cord clear. Never lay tool down until wheel stops. Avoid running tool at side.
Understand kickback causes. Maintain firm grip, position body to resist forces, use auxiliary handle.
To Next Page
General
