Need help?Do you have a question about the Makita 4105KB and is the answer not in the manual?
General| Power Source | Corded Electric |
|---|---|
| No Load Speed | 12000 RPM |
| Blade Diameter | 125 mm (5") |
| Weight | 2.9 kg (6.4 lbs) |
| Max Cutting Depth | 40 mm (1-5/8") |
| Voltage | 120 V |
| Cutting Capacity at 90 Degrees | 1-5/8" |
| Arbor | 20 mm |
| Amperage | 15 A |
Shows symbols used for the tool and their meanings.
Describes the designated purpose of the tool for cutting brick and concrete.
Details on connecting the tool to a power source, including double insulation.
Procedure for setting the desired cutting depth using the wing nut and base.
Aligning the notch on the base with the cutting line on the workpiece.
Instructions on checking and operating the switch trigger for starting and stopping.
Explanation of the overload protector function and how to resume operation.
Step-by-step guide for fitting and removing the diamond wheel securely.
How to attach, use, and empty the dust bag for clean cutting operations.
Method to restore cutting action of the diamond wheel using a grinder wheel or block.
Procedure for checking, replacing, and maintaining carbon brushes.
To Next Page
