Need help?Do you have a question about the Makita 4100KB and is the answer not in the manual?
General| Idle speed | 12200 RPM |
|---|---|
| Cable length | 2.5 m |
| Ergonomic grip | Yes |
| Connected load | 1400 W |
| AC input voltage | 230 V |
Weight and Dimensions| Depth | 220 mm |
|---|---|
| Width | 231 mm |
| Height | 179 mm |
| Weight | 3000 g |
Explanation of symbols used on the equipment for user understanding.
Defines the specific application for which the tool is designed.
Details on connecting the tool to a suitable power source.
Information on noise emission levels and required hearing protection.
Data on vibration emission values during operation.
Essential safety guidelines applicable to all power tools.
Precautions to ensure a safe environment during tool operation.
Guidelines for safe electrical connection and usage.
Measures for operator protection and personal well-being.
Instructions for correct operation, maintenance, and storage.
Specific safety advice for operating the cutting tool.
Information on preventing dangerous kickback reactions.
Further safety precautions and recommendations.
Procedure for setting the desired cutting depth.
Guidance on aligning the tool for accurate cutting.
Explanation of the tool's switch trigger and lock button.
Instructions on where to store the hex wrench to prevent loss.
Steps for safely attaching and detaching the cutting wheel.
Guide for attaching and positioning the dust collection bag.
Procedure for connecting a vacuum cleaner for dust extraction.
Instructions for checking and replacing worn carbon brushes.
To Next Page
