Need help?Do you have a question about the Makita 4334D and is the answer not in the manual?
General| No Load Speed | 0 - 2, 900 SPM |
|---|---|
| Weight | 3.5 lbs |
| Voltage | 9.6 V |
| Battery Type | Ni-Cd |
| Blade Length | 5/8 inch |
Guidelines for maintaining a safe work environment.
Precautions related to electrical components and power.
Measures to protect the operator's well-being during operation.
Best practices for operating and maintaining the tool.
Procedures and requirements for tool servicing and repair.
Key safety precautions for using the jig saw.
Specific safety measures during cutting operations.
Definitions and explanations of symbols used on the tool.
Key safety guidelines for using the battery charger and cartridge.
Additional safety measures for battery charging and handling.
Steps for safely attaching and detaching the battery pack from the tool.
Procedure for charging the battery cartridge using the charger.
Tips and best practices for maximizing the battery's lifespan.
Explanation of orbital and straight line cutting actions.
How to use the switch trigger and lock-off button.
How to adjust the tool speed for different materials.
Instructions for attaching and detaching the saw blade.
Detailed steps for securely installing the saw blade.
Detailed steps for safely removing the saw blade.
How to install and use the anti-splintering device for clean cuts.
How to use the plastic base plate to protect surfaces.
How to use the rip fence for straight and repeated cuts.
How to use the circular guide for cutting circles.
How to install and use the vacuum head for dust collection.
Important safety and usage guidelines during tool operation.
Techniques for cutting curves and scrolling safely.
How to start the tool and move it along the cutting line.
Advice on managing battery life during continuous use.
How to adjust the base for making bevel cuts.
How to adjust the base for front flush cuts.
Methods for creating internal cutouts, including boring a starting hole.
Technique for making plunge cuts without a starting hole.
Techniques for finishing edges and making dimensional adjustments.
Using coolant and other precautions for cutting metal.
General safety advice before performing maintenance.
How to clean the clamp on the blade holder.
Steps for removing the clamp from the blade holder.
Steps for installing the clamp into the blade holder.
How to check and replace worn carbon brushes.
Proper methods for recycling Makita batteries.
List of recommended accessories and attachments for the tool.
Information regarding chemicals known to cause cancer or reproductive harm.
Overview of Makita's one-year limited warranty terms and conditions.
To Next Page
