Need help?Do you have a question about the Makita 6013BR and is the answer not in the manual?
General| Power Source | Corded Electric |
|---|---|
| Chuck Size | 3/8 inch |
| No Load Speed | 0 - 2, 500 RPM |
| Weight | 6.2 lbs |
| Voltage | 110 V |
| Type | Drill |
| No-load Speed | 0 - 2, 500 RPM |
Explains symbols used on the equipment for understanding their meaning before use.
Defines the tool's purpose for drilling in wood, metal, and plastic.
Details connecting the tool to the correct power supply and its double insulation.
Provides typical A-weighted noise level data according to EN60745 standards.
Presents vibration total value data for drilling into metal as per EN60745.
Manufacturer's declaration that the machine conforms to European Directives and standards.
Specific safety precautions for operating the drill, covering handling and workpiece security.
Details on how to operate the switch trigger, lock button, and direction change.
Guides on installing the top grip and drill bits using keyed or keyless chucks.
Instructions for proper drilling technique in wood and metal, including bit selection.
Procedure for checking and replacing worn carbon brushes to maintain tool performance.
Lists recommended accessories for use with the tool and cautions against using others.
To Next Page
