Makita 60921 - Page 11

Hole
When storing the
tool, the hole in the heel
of the tool is a convenient way to hang it
by a cord, hook or other means.
Nominal diameter (mm)
Wood screw
Use the chart to determine the best size
Selecting
correct Phillips bit
driver bit
for the size of screw that you
wish to use.
Bit No.
2.1 - 2.7 (3132'' - 118")
--- 3.1 - 4.8 (1/8" - 3/16")
No. 3
5.1 - 5.5 (1 3/64" - 7/32")
Selecting slotted bit
Use
a slotted bit that properly fits the screw slot. Use of a bit that is too small will
damage the screw and/or bit.
11