Need help?Do you have a question about the Makita 6952 and is the answer not in the manual?
General| Brand | Makita |
|---|---|
| Model | 6952 |
| Category | Impact Driver |
| Language | English |
Read and understand all instructions before using for personal safety.
Save these instructions for future reference.
Read and understand all instructions to prevent electric shock, fire, or serious injury.
Save these instructions for future reference.
Keep work area clean, well-lit, and free from explosive atmospheres.
Ensure proper use of polarized plugs and grounded power supply systems.
Stay alert, use common sense, and avoid distractions while operating the tool.
Follow proper procedures for tool operation, maintenance, and storage.
Use heavy-duty, properly rated extension cords for safe operation.
Handle tool safely by insulated surfaces, wearing hearing protection, and maintaining footing.
Operate the switch trigger to control tool speed and stop.
The tool is equipped with an electric brake for quick stopping.
Change rotation direction using the reversing switch lever.
Use only specified bits and secure them properly with the sleeve.
Attach or remove the hook for temporary hanging of the tool.
Hold firmly, apply pressure, start slowly, and release trigger as screw bottoms out.
Use proper bits, drive screws quickly, predrill pilot holes, and test bolts/nuts.
Replace carbon brushes when worn to the limit mark; use identical parts.
Run tool for 10 minutes without load after replacing brushes.
Use only manufacturer-recommended accessories for safety and reliability.
Record purchase details for service and warranty purposes.
Warning about dust exposure from construction activities.
Details the warranty policy, coverage, exclusions, and limitations.
To Next Page
