TECHNICAL INFORMATION
For Models
Standard equipment
Optional accesories
Product
CONCEPTION AND MAIN APPLICATIONS
8500 rpm
6600 rpm
6000 rpm
Outer dia.:180mm(9") X Arbor dia.:22.23mm(7/8") X Thickness:6mm(1/4")
Outer dia.:230mm(7") X Arbor dia.:22.23mm(7/8") X Thickness:6mm(1/4")
9067/9067S
9067/9067L/9067S
9069/9069S
9067L/9069/9069S
9067L/9069
No load speed
Depressed
center wheel
Specifications
Voltage (V) Current(A) Cycle(Hz)
Input
Max. output(W)
Output
115 15
9.6
9.2
8.8
50/60 1650
2000
2000
2000
900
1100
1100
1100
2600
2900
2900
2900
220 50/60
230 50/60
240 50/60
458mm(18")
139mm(1/2")
200mm(7-7/8") --- 9067/9067L/9067S
Description
Continuous Rating(W)
Net weight
4.2Kg(9.3lbs)
Cord length
2.5m(8.2ft)
Feautures and benefits
9067, 9067L, 9067S, 9069, 9069S
180mm/230mm Angle Grinders
These models are angle grinders of wheel size
180mm/230mm(7"/9") designed as economy type
of sister models of Model 9047/9049 series.
By suppressing maximum output of motor, Torque
limiter is not neccessary for these models.
Model 9067S/ 9069S are with soft start function
versions of Model 9067/9069.
Model 9067L is low speed version of Model 9067.
(for only U.S.A. and Canada)
Lock nut wrench 35
Lock nut wrench 28 (9067L/9069: for only U.S.A. and Canada)
<Note> The standard equipment may differ from country to country.
9067/9067L/9067S Super Flange,
Depressed center wheel 24P/36P,
Inner Flange78 (for cutting wheel), Outer Flange78 (for cutting wheel)
Wire Cup Brush 110 ,
Grip set (loop handle)
9069/9069S Super Flange,
Depressed center wheel 24P/36P,
Inner Flange 78 (for cutting wheel), Outer Flange78 (for cutting wheel)
Wire Cup Brush110,
Grip Set (loop handle)
1. Double insulated
2. See the sheets attached for more information
250mm(9-7/8") --- 9069/9069S
To Next Page
