Need help?Do you have a question about the Makita 9523NBH and is the answer not in the manual?
General| Power Source | Corded Electric |
|---|---|
| Disc Diameter | 125 mm |
| Wheel Diameter | 125 mm |
| Arbor | M14 |
| Spindle Thread | M14 |
| No Load Speed | 11000 rpm |
Safety guidelines for the work environment, focusing on cleanliness and avoiding hazards.
Safety instructions related to electrical connections and double insulation for user protection.
Guidelines for personal attire, alertness, and avoiding common operational mistakes.
Instructions on how to use and maintain the tool properly for safety and longevity.
Guidance on who should perform service and the importance of qualified personnel.
Recommendations for selecting and using extension cords based on ampere rating and length.
Importance of using the correct guard for protection against broken wheel fragments.
Requirement for accessories to match or exceed the tool's speed rating to prevent shattering.
Safety advice on maintaining grip insulation when working near live wires or the tool's cord.
Mandates the use of fiberglass-reinforced wheels with depressed center grinding for safety.
Emphasizes the necessity of wearing safety glasses or goggles for eye protection during operation.
Instruction to inspect wheels for damage before use and test them at no load.
Warning to avoid damaging spindle, flange, or lock nut to prevent wheel breakage.
Prohibition against using wood cutting blades or sawblades due to kickback risk.
Instruction to maintain a firm grip on the tool for better control during operation.
Safety directive to keep hands clear of all moving parts to prevent injury.
Warning to keep the power cord away from the wheel to prevent entanglement and injury.
Pre-operation check to ensure the wheel is clear of the workpiece before starting the tool.
Recommends running the tool at no load to check for vibration indicating installation issues.
Guidance on using the correct surface of the wheel for grinding operations.
Advisory to be aware of flying sparks and direct them away from people and materials.
Instruction to operate the tool only when hand-held, not leaving it running unattended.
Warning against touching the workpiece immediately after use due to potential heat.
Recommendation to wear protective apparel like long sleeves and gloves for skin protection.
Caution about hazardous dust exposure from grinding certain materials and advises respiratory protection.
Description and caution for using the shaft lock to prevent spindle rotation during accessory changes.
Explanation of how to operate the slide switch, including locking it for continuous use.
Instructions and caution for securely installing the side grip before operation.
Guidance on fitting the wheel guard, ensuring correct orientation and secure fastening.
Procedures for mounting and securing grinding wheels or multi-discs, emphasizing guard use.
Instructions for installing flex wheels, including safety precautions and reference to other sections.
Steps for mounting abrasive discs, including tightening procedures and safety notes.
General warning about misuse, forcing the tool, and potential for breakage or injury.
Reiterates prohibition of wood blades due to kickback and injury risks.
Detailed guidance on holding the tool, angle of use, and break-in for new wheels.
Instructions for safe operation of wire cup brushes, including checks and pressure application.
Guidelines for operating wire wheel brushes, emphasizing checks and avoiding excessive pressure.
Safety warnings and operational guidance for using abrasive cut-off wheels, especially regarding guards and angle.
Safety advice to ensure the tool is off and unplugged before performing any inspection or maintenance.
Instructions on checking and replacing worn carbon brushes, emphasizing using identical parts.
Warnings about using recommended accessories, potential injury risks, and ensuring correct guards are used.
To Next Page
