Need help?Do you have a question about the Makita 9561CR and is the answer not in the manual?
General| Power Source | Corded Electric |
|---|---|
| Voltage | 120V |
| No Load Speed | 11, 000 RPM |
| Wheel Diameter | 115mm |
| Arbor | 5/8" |
| Power Type | Electric |
| Spindle Thread | 5/8 inch - 11 |
| Length | 290 mm |
Guidelines for maintaining a safe and well-lit work environment.
Precautions related to electrical connections, grounding, and cord usage.
Guidelines for operator awareness, PPE, and preventing accidental starts.
Safety rules applicable to grinding, sanding, wire brushing, and cut-off operations.
Understanding and preventing kickback during tool operation.
Guidelines for using grinding wheels, guards, and flanges.
Precautions for abrasive cut-off operations, including jamming and workpiece support.
Safety advice for sanding disc paper and wire brush usage.
To Next Page
