Models No.
Description
CONCEPT AND MAIN APPLICATIONS
Specification
Optional accessories
AC310H
Air Compressor
Dimensions: mm (")
Width (W)
Height (H)
Length (L) 476 (18-3/4)
507 (20)
375 (14-3/4)
W
L
H
This model has been launched as Makita first HP(high pressure) air compressor.
1,500W high output motor generates maximum 2.58MPa air flow performance to
exploit the full potential of HP pneumatic tools such as nailer, stapler, screwdriver
and impact driver.
Four couplers are on the front. The two couplers are for HP pneumatic tools,
the others are for RP (regular pressure) pneumatic tools.
Guard with seven bumpers is equipped to protect their couplers and body.
P 1/ 7
PRODUCT
T
ECHNICAL INFORMATION
Continuous Rating (W)
Voltage (V) Cycle (Hz)
Input Output
Max. Output (W)
120
220-240
13.0
7.0
60
50
---
1,800 1,500
1,500
Current (A)
875
875
Model No.
Specifications
Weight according to EPTA procedure: kg (lbs)
Power supply cord: m (ft)
Tank capacity
Continuous rating output: W
Rated amperage for North America: A
Motor
Horsepower: HP
Type
RPM: min-1
2.5
Air flow performance: L/min at 0.75MPa
90
Noise: dB(A)
tested according to outdoor noise directive
Motor thermal overload protector
Insulation
Max air pressure in Tank: Mpa (psi)
Carrying tool
Air hose assembly
Hose reel
None of Standard equipment
Note: Standard equipment may vary by countries.
Air pressure in Tank when restarting: Mpa (psi)
for high pressure
for regular pressure
Operating air pressure: MPa (psi)
AC310H
2.8 (410)
2.3 (330)
Air pressure
through Coupler: Mpa
0 ~ 2.58
0 ~ 0.91
1,500
4-pole induction motor
90
Yes
by grounding
6.2 (1.6)
1.8 (5.9)
36 (79.4)
0.98~2.26 (140 ~ 320)
13
1,700(60Hz) / 1,420(50Hz)
Standard equipment
To Next Page
General
