What to do if the motor of my Makita ADSA01 cannot stop?
If the motor of your Makita Blower continues to run even after you've switched it off, it indicates an electrical or electronic malfunction. Immediately remove the battery and seek assistance from your local authorized service center for repair.
Why does my Makita ADSA01 Blower motor stop running after a little use?
If your Makita Blower's motor stops running shortly after you start using it, it's likely due to overheating. To resolve this, stop using the tool and allow it to cool down.
What to do if my Makita Blower has abnormal vibration?
If you experience abnormal vibration with your Makita Blower, stop using it immediately. This indicates an issue with the drive system, and you should seek repair from your local authorized service center.
Lists compatible battery cartridges and chargers for the tool.
Essential safety precautions for operating power tools.
Guidelines for safe electrical usage to prevent shocks.
Recommendations for operator safety and awareness.
Safe practices for using and maintaining battery-powered tools.
Instructions for tool servicing and upkeep.
Steps before operating the dust blower.
Rules for safe handling and operation of the tool.
Safety tips specifically for blowing tasks.
Safety considerations for inflation/deflation functions.
Critical safety information for battery cartridges.
Procedures for attaching and detaching nozzles.
Step-by-step instructions for removing nozzles.
How to attach and detach the dust cap.
Steps for fitting and removing long nozzles.
Guide for connecting and disconnecting deflating accessories.
Information on using optional rubber attachments.
Instructions for fitting the optional performance filter.
How to insert and remove the battery cartridge.
Explanation of the tool's overload protection feature.
Details on the tool's overheat protection.
Information on battery overdischarge protection.
Other protective measures for the tool.
How to operate the tool's switch trigger.
How to use the trigger-lock button for safety.
Guide for enabling continuous operation with the lock button.
How to change the tool's air volume modes.
How to turn on the tool's indicator lamp.
Information about the tool's hanging hole.
Steps for attaching the optional hook accessory.
Instructions for general blowing tasks.
How to use the tool in tight areas.
Procedure for using the tool to dust air filters.
Techniques for blowing large open spaces.
Guide for inflating various inflatable items.
Using the tool for cleaning small holes and narrow areas.
How to blow dust in tight or hard-to-reach spaces.
Steps for deflating inflatables using the tool.
Instructions for cleaning the tool body and nozzles.
Guide for filter maintenance and replacement.
To Next Page
General
