Makita BBA 520 User Manual

BBA 520
Instruction Manual
Instructions d'emploi
Istruzioni d’impiego
Important:
Read this instruction manual carefully before putting the machine into operation and strictly observe the safety regulations!
Keep this Instruction Manual!
Attention:
Observer avec attention les règles de sûretè. Des erreurs dans l’emploi de la machine peuvent
causer des accidents. Conserver soigneusement les instructions d’emploi!
Attenzione:
Osservare attentamente le norme di sicurezza. Errori nell’uso della macchina possono essere causa di incidenti.
Conservare accuratamente le istruzioni d’impiego!

Makita BBA 520 Specifications

General

Brand	Makita
Model	BBA 520
Category	Lawn and Garden Equipment
Language	English

Summary

INTRODUCTION

Appropriate use

Specifies the intended use of the earth-auger for drilling grounds for piling, reforestation, or planting trees.

SAFETY PRECAUTIONS

Before starting

Read and understand the manual before operating the unit and follow all safety instructions.

EARTH-AUGER ASSEMBLY

FUEL

USE OF THE GAS CONTROL HANDLE

SEMI-ACCELERATION FOR STARTING

How to use the gas control handle for initial engine starting procedures.

ACCELERATION WITH THE MACHINE SWITCHED ON

Adjusting the machine's speed using the gas control while in operation.

STOP (to switch off the engine)

Instructions for safely shutting down the engine.

STARTING ENGINE (Cold engine)

Step-by-step guide for starting the engine when cold.

DECOMPRESSOR

Explanation of the decompressor's function to ease engine starting.

PERIODICAL MAINTENANCE

CARBURETOR

Maintenance tasks for the carburetor, including cleaning and adjustment.

SPARK PLUG

Cleaning and checking the spark plug every 25 running hours.

AIR FILTER

Procedure for cleaning the air filter.

SCREW AND NUTS

Checking and tightening screws and nuts every 25 running hours.

MUFFLER

Checking and cleaning the muffler every 50 running hours.

REDUCTION GEAR BOX

Replacing grease in the reduction gear box every 50 running hours.

AUGER

Regular checks and replacement of the auger bit and coulterblade.

STORAGE