Need help?Do you have a question about the Makita DUM604 and is the answer not in the manual?
Details the technical specifications for the Makita DUM604 model when used as a grass shear.
Details the technical specifications for the Makita DUH202 model when used as a hedge trimmer.
Lists compatible Makita battery cartridges and chargers for the tool, with regional availability notes.
Information on recommended cord-connected power sources for the tool, including regional availability.
Presents the typical A-weighted noise levels for both grass shear and hedge trimmer configurations.
Details the declared tri-axial vector sum vibration emission values for both tool configurations.
Guidance on maintaining a safe and well-lit work environment to prevent accidents.
Essential safety measures for the operator, including PPE, alertness, and proper handling.
Instructions on using the tool correctly, maintaining it, and safe practices during operation and storage.
Best practices for charging, using, and maintaining battery cartridges for optimal performance and lifespan.
Critical safety warnings regarding battery handling, storage, and protection against damage or fire.
Guidelines on ensuring tool safety and reliability through authorized service centers and replacement parts.
Instructions for servicing damaged battery packs, emphasizing manufacturer or authorized provider involvement.
Basic safety instructions and handling advice for operating the cordless grass shear.
Procedures for safely starting the equipment and basic operational guidelines.
Covers safe practices like avoiding unstable surfaces, clearing debris, and inspecting the cutting tool.
Ensuring the tool is in good working order, guards are fitted, and protective installations are used.
Situations requiring the battery cartridge to be removed from the equipment for safety.
Warnings about keeping body parts away from moving blades and avoiding contact with wiring.
Guidelines for safely carrying and transporting the hedge trimmer, including fitting the blade cover.
Advice on electrical hazards, avoiding wet conditions, and safety during thunderstorms.
Recommendations for new users and age limitations for operating the hedge trimmer.
Emphasizes operating the trimmer only when in good physical condition and maintaining focus.
Mandates wearing protective gloves and shoes, and checking the trimmer's working order before use.
Covers secure grip, avoiding no-load operation, and immediate shutdown upon contact with hard objects.
Procedures for checking faults, clearing blockages, and preparing for maintenance, including battery removal.
Instructions on proper battery use, handling, and stopping operation if performance degrades.
Critical warnings about battery disassembly, short-circuiting, extreme temperatures, and environmental exposure.
Notes on handling batteries according to dangerous goods legislation and local disposal requirements.
Precautions regarding battery terminals, preventing short circuits, and avoiding contact with hot surfaces.
Advises against using the battery near high-voltage electrical power lines to prevent tool malfunction.
Explains how to configure the tool for hedge trimming or grass shearing using specific blades.
Step-by-step instructions on how to safely insert and remove the battery cartridge from the tool.
Describes the automatic shutdown mechanism when the tool or battery overheats.
Explains the automatic shutdown when battery capacity is insufficient to prevent damage.
Details the system that stops the tool when it draws an abnormally high current during operation.
Instructions on operating the switch trigger and using the lock-off button for safety.
Table explaining indicator lamp behavior for low battery, empty battery, and overload conditions.
General safety precautions to be observed before and during any assembly or replacement work.
Step-by-step guide on how to detach the grass receiver from the tool.
Instructions for removing the undercover and crank during shear blade replacement.
Steps for preparing new shear blades and aligning components for installation.
Guidance on transferring the blade cover from old shear blades to new ones.
Ensuring pins are correctly aligned with the alignment line for proper shear blade installation.
Adjusting the crank and base plate for correct alignment and secure fitting of shear blades.
Instructions on turning and installing shear blades correctly to ensure they are fixed securely.
Steps for placing and securing the undercover, ensuring alignment with the lock lever.
Performing a final check of the installed blades and testing the tool's proper operation.
Detailed steps for safely removing shear blades from the hedge trimmer attachment.
Preparing new shear blades, including applying grease to the crank for smooth operation.
Guidance on attaching the blade cover to the shear blades before installation.
Aligning pins and positioning the base plate correctly for the shear blades.
Ensuring shear blades are installed securely by fitting pins into holes and claws into grooves.
Tightening screws and aligning the undercover with the lock lever for secure installation.
Ensuring the lock lever is properly seated and performing a final check of the tool's operation.
Instructions on holding the tool and moving it forward for effective grass shearing.
Guidance on trimming near curbs, fences, or trees, emphasizing blade safety.
Technique for trimming sprouts or foliage of small trees by cutting little by little.
Importance of clearing the shearing area of sticks, stones, and weeds before starting.
Warnings about keeping hands away from blades and avoiding contact with the ground.
Advice to avoid operating the tool in very hot weather and to be mindful of physical condition.
Precautions to avoid contacting metal fences or the ground, which can cause injury or recoil.
Warning against overreaching, especially from ladders, and working on unstable surfaces.
Guidance on branch thickness limits and pre-cutting larger branches before trimming.
Instructions for applying low-viscosity oil to the blades before and during operation.
Steps for cleaning dust from blades and applying oil after operation for maintenance.
Methods for cleaning the tool using a dry cloth or soapy water, avoiding harsh chemicals.
General| Blade width | 200 mm |
|---|---|
| Handle type | Short handle |
| Shrub blade | Yes |
| Stroke rate | 2500 spm |
| Product color | Black, Blue |
| Sound pressure level | 56 dB |
| Battery voltage | 18 V |
| Battery technology | - |
Weight and Dimensions| Length | 343 mm |
|---|---|
| Weight | 1400 g |
| Weight (including battery) | 1800 g |
To Next Page
