Makita SW400MP - User Manual

Questions and Answers

Y
Yvette HarringtonJul 30, 2025
Why does my Makita SW400MP vibrate abnormally?
- D
  David ParkerJul 30, 2025
  Abnormal vibration in your Makita Lawn and Garden Equipment can occur for several reasons: * The brushes or sweep drums may be bent or broken, in which case, you should replace them. * The brushes or sweep drums might be loosely attached; make sure to securely attach the clips for the brushes or sweep drums. * The brushes or sweep drums may be attached incorrectly; ensure they are installed properly. * There may be an abnormal drive system.
D
dsteeleAug 8, 2025
What to do if brushes or sweep drums do not rotate in my Makita SW400MP Lawn and Garden Equipment?
- R
  Renee ColemanAug 8, 2025
  If the brushes or sweep drums on your Makita Lawn and Garden Equipment aren't rotating, it could be due to a few reasons. First, check if the pipes of the power unit and the attachment are connected properly and connect them correctly if they are not. Also, check for any foreign matter caught in the brushes or sweep drums and remove it. There may also be an abnormal drive system.
S
Sarah BoltonAug 17, 2025
What to do if brushes or sweep drums continue to rotate even if the switch trigger/lever is released on my Makita SW400MP?
- E
  Eric VelasquezAug 17, 2025
  If the brushes or sweep drums continue to rotate even after releasing the switch trigger/lever on your Makita Lawn and Garden Equipment, the power unit may not be working correctly. If your power unit is engine-operated, try adjusting the idle speed.