EasyManua.ls Logo

Makita BHP459 Technical Information

Makita BHP459
11 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Models No.
Description
PRODUCT
CONCEPT AND MAIN APPLICATIONS
P 1/ 11
BHP459
Cordless Hammer Driver Drill
Specification
Standard equipment
Optional accessories
Note: The standard equipment for the tool shown above may vary by country.
+ – bit 2-45 ........ 1
Belt clip .............. 1
Dimensions: mm (")
Width (W)
Height (H)
Length (L)
192 (7-9/16)
78 (3-1/16)
238 (9-3/8)*
2
256 (10-1/8)*3
*2: with Battery BL1815
*3: with Battery BL1830
Li-ion Battery BL1830
Li-ion Battery BL1815
Drill bits for wood
Drill bits for steel
Phillips bits
Fast charger DC18RA
(for USA, Canada, Guam, Panama, Colombia, Mexico)
Fast charger DC18RC
(for all countries except the countries above)
Charger DC18SD
Charger DC24SC
Automotive charger DC18SE
[Drawn above is the image
with BL1830.]
Battery
Capacity of drill chuck: mm (")
Capacity: mm (")
Max lock torque: N.m (in.lbs)
Electric brake
Variable speed control
Mechanical speed control
Reversing switch
Max fastening torque:
N.m (in.lbs)
Torque setting
Steel
Wood
Soft joint
Hard joint
No load speed: min-
1=rpm
Energy capacity: Wh
Voltage: V
Capacity: Ah
High
Weight according to
EPTA-Procedure 01/2003: kg (lbs)
Low
Max output: W
24 (27*4)/ 54
Charging time (approx.): min.
Cell Li-ion
15/ 22 with DC18RC (DC18RA*1)
18
1.3 (1.5*
4)/ 3.0
Yes
Yes
Yes (2 speed)
Yes
Yes
1.5/ 1.7 (3.3/ 3.8)
13 (1/2)
38 (1-1/2)
16 stages + drill mode
Clutch torque setting: N.m (in.lbs)
1.0 - 5.0 (9 - 44)
45 (400)
25 (220)
45 (400)
0 - 1,500
0 - 400
1.5 (1/16) - 13 (1/2)
250
LED job light
T
ECHNICAL INFORMATION
Model BHP459 Cordless Hammer Driver Drill has been developed
specially for light to medium duty drilling and fastening applications.
This model is equipped with a basic BLDC motor (BrushLess DC motor) specially
designed to provide, above all, more work amount on a single full battery charge.
This product is powered by 18V-1.3(1.5*4)Ah/ 3.0Ah Li-ion batteries BL1815/ BL1830,
and available in the variations listed in the next page.
*
4 for some countries only
L
H
W
Impacts per minute:
min
ˉ¹=ipm
High
Low
0 - 22,500
0 - 6,000
Masonry 13 (1/2)
OFFICIAL USE
for ASC & Sales Shop

Other manuals for Makita BHP459

Question and Answer IconNeed help?

Do you have a question about the Makita BHP459 and is the answer not in the manual?

Makita BHP459 Specifications

General IconGeneral
TypeCordless Hammer Drill
Voltage18V
Battery TypeLithium-ion
No Load Speed (Lo)0 - 400 RPM
No Load Speed (Hi)0 - 1, 500 RPM
Max Torque (Hard)45 Nm
Max Drilling Diameter in Wood38 mm
Max Drilling Diameter in Steel13 mm
Max Drilling Diameter in Masonry13 mm
Chuck Size13 mm
Impact Rate (Lo)0 - 6, 000 BPM
Impact Rate (Hi)0 - 22, 500 BPM
Weight1.7 kg

Related product manuals