Need help?Do you have a question about the Makita BTD146 and is the answer not in the manual?
General| Voltage | 18V |
|---|---|
| Impact Rate | 0 - 3, 200 ipm |
| Chuck Type | 1/4" Hex |
| Weight | 1.5 kg |
| Machine Screw | M4 - M8 |
| Coarse Thread Screw (length) | 22 - 125 mm |
| Battery Type | Li-ion |
| Battery Capacity | 3.0 Ah |
| High Tensile Bolt | M10 |
Defines the tool's purpose for screw driving in wood, metal, and plastic.
Details typical noise levels and vibration total values for BTD134 and BTD146 models.
Covers safe practices for the work area, electrical connections, and personal precautions.
Critical safety guidelines for handling, charging, and storing battery cartridges to prevent hazards.
Provides advice on maximizing battery life through proper charging and storage practices.
Details on installing/removing the battery and the function of the protection system.
Explains tool stops, switch, lamp, reversing controls, and battery indicators.
Instructions on installing and removing driver bits and socket bits for deep and shallow bit holes.
To Next Page
