Need help?Do you have a question about the Makita BTP140 and is the answer not in the manual?
General| Type | Cordless Impact Driver |
|---|---|
| Voltage | 18V |
| Max Torque | 140 Nm |
| Impacts Per Minute | 0-3, 200 IPM |
| Battery Type | Li-Ion |
| Chuck Type | 1/4" Hex |
Presents technical specifications for both BTP130 and BTP140 models, including torque, speed, and capacities.
Explains equipment symbols and the tool's intended applications for safe and proper operation.
Provides noise and vibration levels for BTP130 and BTP140 models as per European standards.
Guidelines for maintaining a safe and well-lit work environment to prevent accidents.
Precautions regarding power tool plugs, cords, and protection against electric shock.
Advice on staying alert, using safety equipment, and preventing accidental starts.
Instructions on proper use, maintenance, and storage of power tools to ensure safety and longevity.
Guidelines for safe handling, charging, and storage of battery packs to prevent hazards.
Crucial warnings and precautions for handling battery cartridges to prevent fire, burns, and eye injury.
Recommendations for maximizing battery life, including charging practices and temperature considerations.
Step-by-step guide for safely inserting and removing the battery pack from the tool.
Explanation of how to operate the tool's switch trigger for starting, stopping, and speed control.
Instructions on how to use the built-in lamp and its automatic shut-off feature.
Details on how to change the direction of rotation using the reversing switch lever.
Guide to selecting the correct operating mode (impact, hammering, clutch, rotation) using the action mode changing lever.
Explanation of how to adjust rotation speed using the action mode lever for high and low settings.
Details on how to adjust the fastening torque in 16 steps using the adjusting ring for screwdriving.
Procedure for installing and removing driver bits and socket bits for various regions.
Instructions for installing different types of bits, including use of bit-pieces where necessary.
Instructions on how to install the accessory hook for temporarily hanging the tool on either side.
Guidance on performing impact driver operations, including setting the mode and applying pressure.
Instructions for screwdriving, including holding the tool, placing the bit, and applying pressure.
Guidance on proper torque application and factors affecting fastening torque for bolts.
Instructions for hammer drilling in concrete or tiles, including mode selection and bit usage.
Specific advice for screwdriving, including torque adjustment and pilot hole recommendations.
Instructions for drilling in wood, including speed selection and using guide screws.
Techniques for drilling in metal, including preventing slippage and using lubricants.
Procedure for replacing worn carbon brushes to maintain tool performance.
Detailed steps for accessing and replacing carbon brushes, including post-replacement checks.
List of recommended accessories and attachments for use with the tool, with a caution on third-party items.
To Next Page
