7 ENGLISH
Wall mounting
WARNING:
WARNING:
WARNING:
WARNING:
WARNING:
CAUTION:
CAUTION:
Fig.3
NOTE: Things you need to prepare:
— Two screws - hanging the charger
Screw size : 4 mm x more than 20 mm.
Screw head size : Less than ø9 mm and less than 3.5 mm thickness.
— One screw (4 mm x more than 25 mm) - for anchoring the charger.
— Tools - for tightening screws
1. Fix two screws for hanging on the wall.
2. Hang the charger on the wall using the hook on the back.
Fig.4
3. Fix the charger by tightening an anchor screw at the top of the charger.
Fig.5
To Next Page
Loading...
Need help?
General
