To Next Page
A
Andrew HernandezAug 12, 2025
Why is my Makita DCL184 Ultrasonic Jewelry Cleaner losing suction power?
- QqporterAug 12, 2025
There are several reasons why your Makita Ultrasonic Jewelry Cleaner might have weak suction: * The dust bag or paper filter may be full. If so, empty the dust bag or paper filter. * The dust bag might be clogged. Try dusting it down or washing it. * The paper filter could be clogged. Replace it with a new one. * The battery cartridge may be discharged. In this case, charge the battery cartridge.
General
