Makita DCS230T - General Precautions; Putting into Operation; Kickback Hazards and Prevention

16/ 20
3-16. Miscellaneous Remarks
[1] Do not reuse Gaskets between Exhaust muffler and Cylinder.
Always use new one for replacement. (Fig. 66)
4. Adjustment
See Instruction manual for adjustment of idling settings and saw chain tension.
[2] If any sawdust or debris in the saw chain tensioner in Sprocket cover,
blow it out using power blower or the like. (Fig. 67)
Fig. 67
Fig. 66