To Next PageTo Next Page
Need help?Do you have a question about the Makita DCS3410TH and is the answer not in the manual?
General| Engine Type | 2-Stroke |
|---|---|
| Displacement | 34 cc |
| Power Output | 1.3 kW |
| Bar Length | 30 cm |
| Chain Gauge | 1.3 mm |
| Chain Pitch | 3/8 inch |
| Fuel Tank Capacity | 0.35 L |
| Oil Tank Capacity | 0.25 L |
| Power Source | Gasoline |
General safety advice for safe operation.
Essential protective gear for safe operation.
Proper handling and mixing of fuel for the chainsaw.
Understanding and preventing dangerous kickback situations.
Safe operating techniques and posture for chainsaw use.
How to safely transport and store the chainsaw.
Emergency procedures and contact information for accidents.
Identification of all parts of the chainsaw.
Step-by-step guide to assembling the guide bar and chain.
How to properly tension the saw chain for safe operation.
Function and testing of the safety chain brake mechanism.
Setting the oil pump feed rate for optimal chain lubrication.
Verifying proper chain oil flow during operation.
Procedures for starting the engine (cold and warm starts).
How to safely shut down the chainsaw engine.
Performing a safety check of the chain brake before use.
Details on mixing gasoline and two-stroke oil and types.
Guidelines for storing fuel safely and preventing contact.
Notes on biodegradable chain oil and avoiding waste oil.
Carburetor adjustment for EU-country models.
Carburetor adjustment for non-EU country models.
How to sharpen the saw chain for optimal cutting.
Cleaning and maintenance of chain drive components.
Maintaining the guide bar and sprocket nose.
Steps for replacing the saw chain.
How to replace the clutch drum and sprocket.
Replacing the fuel filter/suction head.
Cleaning and maintaining the air filter.
How to replace the spark plug.
Replacing the starter cable for engine ignition.
Replacing the return spring mechanism.
Cleaning the muffler for optimal performance.
Cleaning the engine's cylinder area.
