To Next PageTo Next PageWhy does my Makita DCS6401 have insufficient power?
If your Makita Chainsaw is not providing sufficient power, consider these potential causes and solutions: 1. Clean or replace the air filter. 2. Adjust the carburetor. 3. Clear the muffler and exhaust channels. 4. Clean the spark arrester screen.
Why is there no chain lubrication on my Makita DCS6401 Chainsaw?
If there is no chain lubrication on your Makita Chainsaw, it could be due to a few reasons: * The oil tank might be empty, so refill it. * The oil guide groove might be dirty, so clean it. * The oil pump adjusting screw might be incorrectly adjusted, so adjust it.
General| Engine Displacement | 64 cc |
|---|---|
| Weight | 6.3 kg |
| Chain Pitch | 3/8" |
| Fuel Capacity | 0.75 L |
| Oil Capacity | 0.42 L |
