Makita DFL083F Series User Manual

2 ENGLISH
SPECIFICATIONS
Model: DFL083F DFL125F DFL204F DFL302F DFL403F
Fastening torque Hard joint 2 - 8 N•m 5 - 12 N•m 8 - 20 N•m 16 - 30 N•m 25 - 40 N•m
Soft joint 2 - 8 N•m 5 - 12 N•m 8 - 20 N•m 16 - 30 N•m 25 - 40 N•m
Square drive 9.5 mm
No load speed
*1
150 - 700
min
-1
100 - 700
min
-1
100 - 440
min
-1
70 - 230
min
-1
50 - 220
min
-1
Rated voltage D.C. 14.4 V
Overall length
(Depending on the battery)
464 - 481 mm 503 - 520 mm
Net weight 1.7 - 2.1 kg 2.0 - 2.3 kg
• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange
without notice.
• Specicationsmaydifferfromcountrytocountry.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
•
*1
No load speed is adjustable with exclusive application.
Applicable battery cartridge and charger
Battery cartridge BL1415N / BL1415NA / BL1430 / BL1430B / BL1440 / BL1450 /
BL1460A / BL1460B
Charger DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
andchargersmaycauseinjuryand/orre.
Symbols
The followings show the symbols used for the equip-
ment. Be sure that you understand their meaning before
use.
Read instruction manual.
Ni-MH
Li-ion
Only for EU countries
Do not dispose of electric equipment or
battery pack together with household waste
material!
In observance of the European Directives,
on Waste Electric and Electronic
Equipment and Batteries and Accumulators
and Waste Batteries and Accumulators
and their implementation in accordance
with national laws, electric equipment and
batteries and battery pack(s) that have
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.
Intended use
The tool is intended for screw driving in wood, metal
and plastic.
Noise
The typical A-weighted noise level determined accord-
ing to EN62841:
Model DFL083F
Sound pressure level (L
pA
) : 70 dB(A) or less
Uncertainty (K) : 3 dB(A)
Model DFL125F
Sound pressure level (L
pA
) : 70 dB(A) or less
Uncertainty (K) : 3 dB(A)
Model DFL204F
Sound pressure level (L
pA
) : 70 dB(A) or less
Uncertainty (K) : 3 dB(A)
Model DFL302F
Sound pressure level (L
pA
) : 70 dB(A) or less
Uncertainty (K) : 3dB(A)
Model DFL403F
Sound pressure level (L
pA
) : 70 dB(A) or less
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
NOTE: The declared noise emission value(s) has
been measured in accordance with a standard test
method and may be used for comparing one tool with
another.
NOTE: The declared noise emission value(s)
may also be used in a preliminary assessment of
exposure.

Makita DFL083F Series Specifications

General

Brand	Makita
Model	DFL083F Series
Category	Power Screwdriver
Language	English