Need help?Do you have a question about the Makita DHR202 and is the answer not in the manual?
General| Voltage | 18V |
|---|---|
| Max in Concrete | 20 mm |
| Max in Steel | 13 mm |
| Max in Wood | 26 mm |
| Impact Energy | 2.0 J |
| No Load Speed | 0 - 1, 100 RPM |
| Blows per Minute | 0 - 4, 000 BPM |
| Weight | 3.2 kg |
| Battery Type | Lithium-ion |
| Chuck Type | SDS-Plus |
Details capacities, speed, blows, weight, and voltage for the DHR202 model.
Explains the meaning of various symbols used on the equipment for safe operation.
Describes the specific applications for which the tool is designed.
Details typical A-weighted noise levels for sound pressure and power.
Specifies vibration emission values for hammer drilling, chiselling, and metal drilling.
Read all safety warnings and instructions to prevent shock, fire, or injury.
Advice on maintaining a clean, well-lit, and safe work environment.
Guidelines for safe electrical connections and avoiding shock.
Guidance on proper tool use, maintenance, and storage to ensure safety and longevity.
Instructions for safe handling, charging, and storage of battery cartridges.
Recommends servicing by qualified personnel using identical replacement parts.
Emphasizes wearing eye protection, hearing protection, and other safety gear.
Covers firm footing, holding the tool, and avoiding moving parts for safe operation.
Essential safety rules for using, storing, and handling battery cartridges.
Advice on charging, operation, and storage to maximize battery life.
Step-by-step guide for correctly installing and removing the battery cartridge.
Details the system that automatically cuts off power to extend battery life.
Explains how to operate the switch trigger and the LED work light.
Instructions for using the tool for drilling in wood, metal, or plastic.
Instructions for chipping, scaling, or demolition operations.
Instructions for drilling in concrete, masonry, and stone.
Explains the torque limiter and when the motor will disengage.
Guide to installing and adjusting the auxiliary side grip for safe operation.
Recommendations for applying bit grease for smooth action and service life.
Procedure for inserting and removing bits from the chuck.
Procedure for changing the angle of the bit for specific demolition tasks.
How to use the depth gauge for drilling holes of uniform depth.
Instructions for attaching the dust cup to prevent dust during operation.
How to use the blow-out bulb for cleaning dust from holes.
Guidance on performing hammer drilling operations safely and effectively.
Techniques for demolition operations using the appropriate mode.
Instructions for installing and using the optional drill chuck assembly.
Tips for effective drilling and handling strong twisting forces.
Step-by-step guide for inspecting and replacing worn carbon brushes.
To Next Page
