To Next PageTo Next Page
Need help?Do you have a question about the Makita DHR202Z and is the answer not in the manual?
General| Power source | Battery |
|---|---|
| Battery voltage | 18 V |
| Impact rate | 4000 bpm |
| Rated speed (max) | 1100 RPM |
| Impact energy (max) | 2 J |
| Drilling diameter in wood (max) | 26 mm |
| Drilling diameter in steel (max) | 13 mm |
| Vibration level (metal drilling) | 3 m/s² |
| Vibration level (hammer drilling) | 14.5 m/s² |
| Drilling diameter in concrete (max) | 20 mm |
| Soft grip | Yes |
| Product color | Black, Blue, Silver |
| Noise level | 98 dB |
Weight and Dimensions| Weight | 3200 g |
|---|
Essential safety measures for the cordless rotary hammer.
Procedure for inserting and removing the battery pack.
Details about the tool's battery protection system.
Explanation of how to operate the switch trigger.
How to select hammer drilling mode for concrete and masonry.
How to select rotation mode for wood, metal, and plastic.
How to select hammering mode for chipping and demolition.
Instructions for installing and positioning the side grip.
Guidance on applying bit grease for lubrication.
Steps for securely fitting and removing drill bits.
How to adjust the bit angle for chipping operations.
Detailed steps for performing hammer drilling operations.
Using the blow-out bulb to clear dust from holes.
How to perform chipping, scaling, and demolition tasks.
Instructions for drilling in materials like wood and metal.
Procedure for inspecting and replacing worn carbon brushes.
