To Next PageTo Next Page
Need help?Do you have a question about the Makita DRT50ZJX2 and is the answer not in the manual?
General| Input power | - W |
|---|---|
| Power source | Battery |
| Product color | Black, Blue, Silver |
| Overall length | 226 mm |
| Collet diameter | 35 mm |
| Idle speed (max) | 30000 RPM |
| Sound power level | 78 dB |
Weight and Dimensions| Width | 89 mm |
|---|---|
| Height | 134 mm |
| Weight | 2100 g |
The tool is intended for flush trimming and profiling of wood, plastic and similar materials.
The typical A-weighted noise level determined according to EN60745: Sound pressure level (LPA) : 78 dB(A) Uncertainty (K) : 3 dB(A)
The vibration total value (tri-axial vector sum) determined according to EN60745: Work mode: rotation without load Vibration emission (an) : 2.5 m/s² or less Uncertainty (K): 1.5 m/s²
Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.
Hold power tool by insulated gripping surfaces, because the cutter may contact hidden wiring. Cutting a "live" wire may make exposed metal parts of the power tool "live" and shock the operator.
Covers warnings on disassembly, shorting, exposure to water, storage, incineration, dropping, and use of non-genuine batteries.
Guidance on charging practices to prolong battery lifespan, including charge levels, temperature, and storage.
Instructions for safely removing and installing the battery cartridge, ensuring it is fully locked.
Description of the tool's automatic shutdown features for overload, overheat, and overdischarge protection.
Steps to adjust cutting depth using the lock lever and adjusting screw.
Setting cutting depth with the plunge base using stopper screws and poles for precise depth.
Procedure for inserting and tightening trimmer bits using the shaft lock and collet nut with a wrench.
How to attach or detach the trimmer base by aligning grooves and closing the lock lever.
Guide on how to operate the tool with the trimmer base, including setting speed and feed direction for cutting edges.
Instructions for using the optional straight guide for precise linear cuts, including assembly and adjustment.
Safety precautions and guidelines for performing inspection or maintenance on the tool, emphasizing authorized service centers.
