Need help?Do you have a question about the Makita DRT50 and is the answer not in the manual?
General| Motor Type | Brushless |
|---|---|
| Voltage | 18V |
| No Load Speed | 10, 000 - 30, 000 RPM |
| Collet Capacity | 1/4", 3/8" |
| Type | Cordless |
| Weight | 2.1 kg (with battery) |
| Net Weight | 2.1 kg (with battery) |
Shows symbols and explains their meanings for safe operation.
Defines the tool's purpose for woodworking applications.
Details the A-weighted noise level and uncertainty.
Specifies vibration emission values for different work modes.
Provides the conformity declaration for European countries.
Crucial safety guidelines for operating any power tool safely.
Guidelines for maintaining a safe working environment to prevent accidents.
Essential precautions related to electrical connections and shock prevention.
Measures to protect the operator's well-being during tool use.
Instructions on proper operation, handling, and maintenance of power tools.
Guidance on professional servicing and repair of the power tool.
Specific safety instructions for using cordless trimmers.
Critical safety guidelines for handling and charging battery cartridges.
Recommendations for optimizing battery performance and longevity.
Step-by-step guide for attaching and detaching the battery.
Explains how to check the battery charge level using indicator lamps.
Describes the tool's automatic shutdown due to overheating.
Explains the tool's shutdown when the battery capacity is low.
Details how to turn the tool on, off, and put it into standby mode.
Instructions for operating the front lamp for illumination.
How to control the tool's rotation speed using the dial.
Features like constant speed control and soft start.
Procedure for setting the desired cutting depth.
Steps to set the cutting depth when using the plunge base accessory.
Procedure for securely fitting and removing trimmer bits.
How to attach and detach the standard trimmer base.
Steps for installing and removing the optional tilt base.
Instructions for installing and removing the optional offset base.
Procedure for attaching and detaching the optional plunge base.
How to install and remove the dust nozzle for the plunge base.
Steps to attach and detach the parallel ruler accessory.
Guidance on operating the tool with the standard trimmer base.
How to use the straight guide for precise cuts.
Using the straight guide accessory for cutting circles.
How to use the templet guide for repetitive pattern cuts.
Using the trimmer guide for curved edge trimming.
Operating the tool with the offset base for tight areas.
Combining trimmer base with offset plate and grip for stability.
Operating the tool with the plunge base.
How to use the straight guide with the plunge base.
Operating the tool with the templet guide.
How to use the parallel ruler for straight cuts.
Procedure for swapping grip types on the tool.
Lists recommended accessories and attachments for the tool.
Details specifications and types of trimmer bits available.
To Next Page
