To Next PageTo Next Page
Need help?Do you have a question about the Makita DSP601 and is the answer not in the manual?
General| Blade Diameter | 165 mm |
|---|---|
| Voltage | 18 V |
| Max Cutting Depth at 0° | 57 mm |
| Max Cutting Depth at 45° | 40 mm |
| Bevel Capacity | 48° |
| Overall Length | 332 mm |
Lists the models DSP600 and DSP601 and their key specifications.
Describes the primary applications and suitable materials for the tool.
Details the A-weighted noise emission levels for the tool.
Details the vibration emission levels for the tool.
Provides universal safety advice applicable to all power tools.
Specific safety precautions for cordless circular saws.
Step-by-step guidelines for safe cutting operations.
Explains kickback causes and provides methods to prevent it.
Details the safety guard's operation and required checks.
Covers specific safety advice for various situations and materials.
Crucial safety instructions for handling and using battery cartridges.
Advice on proper charging and storage for maximum battery lifespan.
Essential safety instructions for operating the wireless unit.
Step-by-step instructions for installing and removing the battery.
Explains overload, overheat, and overdischarge protection features.
How to check the remaining battery charge using indicator lamps.
How the tool automatically adjusts speed based on work load.
Steps to set the cutting depth for optimal performance.
Using the quick stop button for splinter control during cuts.
How to perform bevel cuts and use angle setting stoppers.
Guidance on aligning the tool for accurate cutting lines.
How to operate the switch trigger and lock-off button safely.
How to use the dial to set the desired blade rotation speed.
Details on overload protection, constant speed, and soft start features.
Proper storage location for the included hex wrench.
Step-by-step guide for installing and removing the saw blade.
How to connect a compatible vacuum cleaner for dust extraction.
Guide for performing standard sawing operations safely and effectively.
Instructions for using the optional guide rail accessory for straight cuts.
How to use the sub base as a guide for precise cuts.
Procedures for performing plunge cuts safely and effectively.
Using the optional bevel guide for precise miter cuts.
Step-by-step instructions to install the wireless unit into the tool.
Process for pairing the tool with a compatible vacuum cleaner.
How to start the automatic vacuum cleaner function linked to the tool.
Explanation of the wireless unit's indicator lamp status meanings.
Procedure to remove a tool's registration from the vacuum cleaner.
Solutions for problems with the wireless activation lamp not lighting or blinking.
Troubleshooting steps for failed tool registration or cancellation processes.
What to do if the vacuum cleaner does not run with the tool's switch.
Reasons and fixes for the vacuum cleaner running without the tool's switch activation.
Essential safety advice before performing any inspection or maintenance.
How to adjust the tool for precise 0° and 45° cut accuracy.
