To Next PageTo Next Page
Need help?Do you have a question about the Makita DSP600ZJ and is the answer not in the manual?
General| Soft start | Yes |
|---|---|
| Product color | Black, Blue |
| Built-in light | - |
| Suitable for materials | Metal, Wood |
| Power protection features | Overload |
| Blade diameter | 165 mm |
| Idle speed (max) | 6300 RPM |
| Idle speed (min) | 2500 RPM |
| Cutting depth (45º) | 40 mm |
| Cutting depth (90º) | 56 mm |
| Power source | Battery |
| Battery voltage | 18 V |
Weight and Dimensions| Width | 346 mm |
|---|---|
| Weight | 5100 g |
Tool's purpose and supported materials for cutting.
A-weighted noise level measurements for the tool.
Vibration total value measurements for the tool.
Compliance statement for European countries.
Universal safety guidelines for all power tools.
Specific safety advice for cordless circular saws.
Explanation of kickback causes and how to avoid it.
Checks and maintenance of the saw's blade guard.
Extra safety precautions during tool operation.
Safety guidelines for handling battery cartridges.
Recommendations for prolonging battery lifespan.
Safety guidelines for the wireless unit.
Procedures for battery installation and removal.
Explains overload, overheat, and overdischarge protection.
How to check the battery charge level.
Adjusting speed, depth, and using quick stop for cuts.
Setting bevel angles, positive stopper, and -1° cuts.
Aligning the tool for accurate cuts with or without guide rail.
Proper storage of the hex wrench to prevent loss.
Step-by-step guide for blade replacement.
Steps for ordinary sawing and plunge cutting.
Using guide rails, sub bases, and bevel guides for precision.
Overview of the wireless function's capabilities.
Steps to install the wireless unit into the tool.
Process to link the tool with a vacuum cleaner.
How to activate the wireless dust extraction.
Explains the meaning of different lamp indicators.
How to remove the tool's registration from the vacuum.
How to calibrate cut angles for precision.
