Need help?Do you have a question about the Makita DSS611Z and is the answer not in the manual?
General| Blade diameter | 165 mm |
|---|---|
| Idle speed (max) | 3700 RPM |
| Cutting depth (45º) | 40 mm |
| Power source | Battery |
| Battery voltage | 18 V |
Weight and Dimensions| Depth | 347 mm |
|---|---|
| Weight | 3100 g |
Guidelines for maintaining a safe and clear work environment to prevent accidents.
Precautions related to power sources, grounding, and water exposure for electrical safety.
Advice on staying alert, using protective equipment, and preventing unintentional tool startup.
Essential safety guidelines and techniques for operating the saw during cutting operations.
Specifies the intended application of the tool and materials it is designed to cut.
Guidance on charging, storing, and using battery cartridges to ensure longevity and safety.
Instructions and precautions for securely installing and removing the battery cartridge.
Procedure for setting the correct cutting depth based on workpiece thickness.
Instructions for adjusting the saw for bevel cuts.
Aligning the saw for accurate straight cuts using the base and fence.
Aligning the saw for accurate 45° bevel cuts using the base and fence.
Adjusting the saw's accuracy for 90° and 45° cuts using screws and a triangular rule.
Adjusting the saw's accuracy for 90° vertical cuts using screws and a triangular rule.
Procedure for checking and replacing worn carbon brushes to maintain tool performance.
To Next Page
