What to do if Makita DUC101 has abnormal vibration?
If you notice abnormal vibration in your Makita Saw, stop using it immediately! Check if the guide bar or saw chain is loose and adjust the tension. If the issue persists, the tool may be malfunctioning.
What to do if there is no oil on the chain of my Makita Saw?
If there's no oil on the chain of your Makita Saw, the oil tank is probably empty. Refill it. Also, the oil guide groove might be dirty, so clean it.
Why my Makita Pole Saw does not start?
If your Makita Pole Saw does not start, the battery cartridge might not be installed correctly or the battery may be low. First, ensure a charged battery cartridge is properly installed. If the issue persists, recharge the battery. If recharging doesn't solve the problem, consider replacing the battery cartridge.
Why my Makita Pole Saw does not reach maximum RPM?
If your Makita Pole Saw isn't reaching maximum RPM, the battery cartridge may be improperly installed or the battery power could be dropping. Ensure the battery cartridge is correctly installed as described in the manual. If the issue continues, recharge the battery cartridge; if that doesn't work, replace it. If the issue still persists, the drive system may not be working correctly.
Details the specifications for the saw chain, guide bar, and sprocket.
Details kickback causes and operator prevention methods, including grip and body positioning.
Lists required PPE for safe operation, including clothing, eye, ear, and hand protection.
To Next Page
General
