To Next PageTo Next PageWhy doesn't my Makita DUC302Z Chainsaw reach maximum RPM?
If your chainsaw isn't reaching maximum RPM, there could be a few reasons. First, ensure the battery cartridge is installed correctly as described in this manual. Also, the battery power might be dropping, so try recharging the battery cartridge, and if that doesn't work, replace it. If these steps don't resolve the issue, it's possible that the drive system isn't working correctly.
General| Type | Cordless Chainsaw |
|---|---|
| Power Source | Battery |
| Battery Voltage | 18V |
| Automatic Oiler | Yes |
| Bar Length | 30 cm (12 inches) |
| Chain Pitch | 3/8 inch |
| Chain Gauge | 1.3 mm |
| Weight (without battery) | 3.6 kg |
| Oil Tank Capacity | 200 ml |
Lists and identifies all parts of the cordless chain saw with corresponding numbers.
Details technical specifications for DUC252 and DUC302 models, including battery compatibility.
Explains safety symbols and the intended purpose of the cordless chain saw.
Provides essential safety warnings applicable to all power tools.
Details safety precautions specific to operating cordless chain saws and top-handle models.
Outlines critical safety guidelines for handling and using battery cartridges.
Describes features like battery protection, overload, overheat, and discharge protections.
Provides instructions on how to insert and remove the battery cartridge.
Explains how to operate the switch and check the chain brake functionality.
Details how to adjust chain lubrication and tension for optimal performance.
Guides on fitting the saw chain and adjusting its tension correctly.
Provides guidance on proper techniques for cutting, especially pruning trees.
Covers sharpening, file guiding, and cleaning the guide bar and oil discharge hole.
Instructions for replacing the sprocket, carbon brushes, and storing the tool.
Provides solutions for common malfunctions and issues encountered with the tool.
Lists recommended accessories for use with the chain saw.
Details the declared noise and vibration emission values for the models.
States the compliance of the product with European regulations.
