To Next PageTo Next PageWhy is my Makita DUH754SZ not reaching full speed?
If your Makita Trimmer isn't reaching its maximum RPM, the battery might be installed improperly (install the battery cartridge as described in this manual), the battery power may be dropping (recharge or replace the battery), or the drive system may not be working correctly. For the latter, consult your local authorized service center.
What to do if my Makita Trimmer has abnormal vibration?
If your Makita Trimmer is vibrating abnormally, immediately stop the machine. This could be because the shear blades are broken, bent, or worn (replace the shear blades). It may also be caused by the drive system not working correctly, and in this case, you should ask your local authorized service center for repair.
General| Type | Hedge Trimmer |
|---|---|
| Battery Voltage | 18 V |
| Blade Length | 750 mm |
| Max Cutting Capacity | 25 mm |
| Weight | 3.9 - 4.5 kg |
| Power source | Battery |
| Cutting Length | 750 mm |
| Blade Type | Double Sided |
| No Load Speed | 0 - 3, 600 min-1 |
| No-load speed | 0 - 3, 600 min-1 |
