To Next Page
C
Christopher TaylorAug 20, 2025
Why my Makita EA3500F engine does not start?
- Kkatherine71Aug 20, 2025
If your Makita Chainsaw engine isn't starting easily, it could be due to a malfunction in the fuel supply, compression system, or a mechanical issue. Inspect and repair the ignition system, fuel supply, compression system, and mechanical components. Other potential causes include a faulty STOP switch, wiring issues, a defective spark plug or cap, incorrect choke position, a bad carburetor, a dirty suction head, a bent or interrupted fuel line, or defective cylinder base packing ring, radial shaft packings, cylinder or piston rings. Also, check if the spark plug seals properly, the starter spring is broken, or if there are broken parts inside the engine. Investigate all these potential issues and replace or repair parts as needed.
General
