Makita EA3500S Instruction Manual

40 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

Instruction Manual

Original Instruction Manual

Important:

Read this instruction manual carefully before putting the chain saw into operation and strictly observe the

safety regulations!

Keep this instruction manual!

EA3500S

EA3501S

EA3502S

EA3503S

Table of Contents

Other manuals for Makita EA3500S

Operator's And Safety Manual44 pages

Original Instruction Manual220 pages

Technical Information16 pages

Questions and Answers:

N
Nicholas GutierrezAug 25, 2025
Why is my Makita EA3500S Chainsaw engine not starting?
- K
  Keith BurtonAug 25, 2025
  There could be several reasons why your Makita Chainsaw engine isn't starting. It could be due to a malfunction in the fuel supply or compression system, or a mechanical issue. Check the ignition spark and ensure the fuel tank is full. Also, inspect the STOP switch and wiring for any faults. Other potential causes include a defective carburetor, a dirty suction head, a bent or interrupted fuel line, defective cylinder base packing ring or piston rings, or broken parts in the starter or engine. Examine the cylinder base packing and piston rings. Inspect the starter spring and the engine for broken parts.
B
bridgetclarkSep 2, 2025
What to do if Makita Chainsaw engine starts, but dies immediately?
- M
  Mallory WilsonSep 2, 2025
  If your Makita Chainsaw starts but dies immediately, it could be due to a wrong idling adjustment, or a dirty suction head or carburetor. Adjust the idling and clean the suction head or carburetor. Also, check the tank venting and fuel line, as a defective tank venting, interrupted fuel line, defective cable or combination switch could also be the cause.
M
Michael NewtonSep 1, 2025
How to fix insufficient power in Makita EA3500S Chainsaw?
- P
  patricia11Sep 1, 2025
  If your Makita Chainsaw has insufficient power, the air filter may be dirty, the carburetor adjustment may be wrong, the muffler may be clogged, the exhaust channel in the cylinder may be clogged, or the spark arrester screen may be clogged. To resolve this, clean the air filter and muffler, and adjust the carburetor.
M
madison70Aug 31, 2025
Why is my Makita EA3500S chain not running?
- D
  Dakota PadillaAug 31, 2025
  If the chain on your Makita Chainsaw isn't running, the chain brake might be activated. Check if the chain brake is in the 'off' position.
D
Dr. Joe MorrisonAug 30, 2025
How to fix warm start difficulties with my Makita EA3500S Chainsaw?
- K
  Kevin WhiteAug 30, 2025
  If you're experiencing warm start difficulties with your Makita Chainsaw, it's likely due to an incorrect carburetor adjustment. Adjust the carburetor settings.
M
Molly ThomasAug 28, 2025
What to do if my Makita EA3500S engine starts, but dies immediately?
- C
  Cory ClarkAug 29, 2025
  If your Makita Chainsaw engine starts but dies immediately, the idling adjustment might be wrong, or the suction head or carburetor could be dirty. Check and adjust the idling settings and clean the suction head or carburetor. Another possibility is a defective tank vent, an interrupted fuel line, a defective cable, or a defective combination switch. Inspect the tank vent and ensure the fuel line is not interrupted.
L
Lori PattersonAug 27, 2025
What to do if my Makita EA3500S has insufficient power?
- R
  Richard WelchAug 27, 2025
  If your Makita Chainsaw has insufficient power, it might be because the air filter is dirty, the carburetor adjustment is wrong, the muffler is clogged, the exhaust channel in the cylinder is clogged, or the spark arrester screen is clogged. Clean the air filter and check the carburetor adjustments.
C
Chelsea LynchAug 27, 2025
How to fix insufficient power in Makita Saw?
- G
  Gary ColemanAug 27, 2025
  If your Makita Saw has insufficient power, the cause might be a dirty air filter, incorrect carburetor adjustment, a clogged muffler, a clogged exhaust channel in the cylinder, or a clogged spark arrester screen. Clean or replace the air filter and muffler.
T
Tonya ConleyAug 25, 2025
Why my Makita Chainsaw engine does not start?
- M
  michael19Aug 26, 2025
  If your Makita Chainsaw engine is not starting, begin by checking the ignition spark. Also inspect the wiring, and replace the spark plug or cap if defective. Ensure proper spark plug sealing. Adjust the combination switch and clean the carburetor if the combination switch is in Choke position, or if the carburetor is defective, or the suction head is dirty, or the fuel line is bent or interrupted. Finally, inspect the starter and engine parts, and replace defective components if the cylinder base packing ring or radial shaft packings are defective, or if the cylinder or piston rings are defective.

Makita EA3500S Specifications

General

Weight	4.6 kg
Chain Pitch	3/8 inch
Bar Length	35 cm
Fuel Tank Capacity	0.48 liters
Oil Tank Capacity	0.28 L
Power Rating	1.7 kW
Chain Gauge	0.050 inch

Related product manuals

Preview: Makita EA3500F

Preview: Makita EA3500SRDB

Makita EA3500SRDB

Preview: Makita EA3501S

Preview: Makita EA3502S

Preview: Makita EA3501F

Preview: Makita EA3201S

Preview: Makita EA3202S

Preview: Makita EA3200S

Preview: Makita EA3203S

Preview: Makita EA3201S35B

Makita EA3201S35B