Makita EA5000P Instruction Manual

31
Extract from the spare parts list
Use only original MAKITA parts. For repairs and
replacement of other parts, see your MAKITA service centre.
Pos. MAKITA-No. Qty. Denomination
1 445 033 631 1 Sprocket nose bar .325“, 33 cm (13“)
445 038 631 1 Sprocket nose bar .325“, 38 cm (15“)
445 045 631 1 Sprocket nose bar .325“, 45 cm (18“)
2 528 086 656 1 Saw chain .325“ for 33 cm
528 086 664 1 Saw chain .325“ for 38 cm
528 086 672 1 Saw chain .325“ for 45 cm
2 534 686 056 1 Saw chain .325“ for 33 cm
534 686 064 1 Saw chain .325“ for 38 cm
534 686 072 1 Saw chain .325“ for 45 cm
1 445 033 141 1 Sprocket nose bar .325“, 33 cm (13“)
445 038 141 1 Sprocket nose bar .325“, 38 cm (15“)
445 045 141 1 Sprocket nose bar .325“, 45 cm (18“)
2 532 484 056 1 Saw chain .325“ for 33 cm
532 484 064 1 Saw chain .325“ for 38 cm
532 484 072 1 Saw chain .325“ for 45 cm
1 443 038 651 1 Sprocket nose bar 3/8“, 38 cm (15“)
443 045 651 1 Sprocket nose bar 3/8“, 45 cm (18“)
443 053 651 1 Sprocket nose bar 3/8“, 53 cm (21“)
2 528 099 656 1 Saw chain 3/8“ for 38 cm
528 099 664 1 Saw chain 3/8“ for 45 cm
528 099 672 1 Saw chain 3/8“ for 53 cm
2 523 093 656 1 Saw chain 3/8“ for 38 cm
523 093 664 1 Saw chain 3/8“ for 45 cm
523 093 672 1 Saw chain 3/8“ for 53 cm
3 952 010 630 1 Chain protector for 33-38 cm
952 020 640 1 Chain protector for 45 cm
952 020 650 1 Chain protector for 53 cm
4 181 213 601 1 Sprocket guard, cpl.
5 923 208 004 2 Hexagonal nut M8
6 941 719 131 1 Universal wrench SW 19/13
7 940 827 000 1 Offset screwdriver
8 944 340 001 1 Carburetor screwdriver
9 963 601 121 1 Suction head
10 181 114 202 1 Fuel tank cap, cpl.
11 963 229 036 1 O-Ring 29,3x3,6 mm
12 170 114 100 1 Oil tank cap, cpl.
13 963 225 030 1 O-Ring 25x3 mm
14 965 603 021 1 Spark plug
15 181 164 020 1 Starter cable 3,5x1100 mm
16 181 173 240 1 Air Þ lter (nylon)
16 181 173 190 1 Air Þ lter (ß eece)
17 181 163 050 1 Return spring pack, complete
18 181 163 080 1 Spring
19 181 163 090 1 Driver
20 026 224 010 1 3/8” sprocket, (for 093, 099), 7-tooth
181 224 040 1 Sprocket .325“, (for 086, 484, 686) , 7-tooth
21 181 223 062 1 Clutch drum
22 927 408 000 1 Circlip
23 181 174 470 1 Spark arrester screen
Accessories (not delivered with the chain saw)
25 953 100 090 1 Chain gauge
26 953 004 010 1 File handle
27 953 003 100 1 Round Þ le, dia. 4,5 mm
28 953 003 070 1 Round Þ le, dia. 4,8 mm
29 953 003 040 1 Round Þ le, dia. 5,5 mm
30 953 003 060 1 Flat Þ le
31 953 030 030 1 File holder 3/8“
32 953 030 030 1 File holder .325“
- 949 000 035 1 Combined can
(for 5l fuel, 2.5l chain oil)
DCS4630, 5030, 5032
EA5000P, EA5001P

Makita EA5000P Specifications

General

Brand	Makita
Model	EA5000P
Category	Chainsaw
Language	English