Makita EA6101P - Extract from the Spare Parts List

43
Extract from the spare parts list
Use only original MAKITA parts. For repairs and
replacement of other parts, see your MAKITA service center.
EA6100P
EA6101P
Pos. MAKITA-No. Qty. Denomination
1 445 045 641 1 Sprocket nose bar .325“, 45 cm (18“)
2 523 082 672 1 Saw chain .325“ for 45 cm
1 445 045 631 1 Sprocket nose bar .325“, 45 cm (18“)
2 528 086 672 1 Saw chain .325“ for 45 cm
1 443 045 661 1 Sprocket nose bar 3/8“, 45 cm (18“)
443 053 661 1 Sprocket nose bar 3/8“, 53 cm (21“)
2 513 496 664 1 Saw chain 3/8“ for 45 cm
513 496 672 1 Saw chain 3/8“ for 53 cm
3 952 020 640 1 Chain protector for 45 cm
952 020 650 1 Chain protector for 53 cm
4 941 719 133 1 Universal wrench SW 19/13
5 940 827 000 1 Offset screwdriver
6 944 340 001 1 Carburetor screwdriver
7 010 114 010 1 Suction head
8 181 114 202 1 Fuel tank cap, cpl.
9 963 229 036 1 O-Ring 29,3 x 3,6 mm
10 181 163 050 1 Return spring pack, complete
11 181 163 080 1 Spring
12 315 163 090 1 Driver
13 395 164 010 1 Starter cable 3,8x1000 mm
14 965 603 021 1 Spark plug
15 181 114 202 1 Oil tank cap, cpl.
16 963 229 036 1 O-Ring 29,3 x 3,6 mm
17 130 173 010 1 Air lter
18 130 213 600 1 Sprocket guard, cpl.
19 923 208 004 2 Hexagonal nut M8
20 181 223 062 1 Clutch drum
21 026 224 010 1 3/8“ sprocket, 7-tooth
22 181 224 040 1 .325“ sprocket, 7-tooth
23 927 408 000 1 Circlip
24 130 174 041 1 Spark arrester screen
Accessories (not delivered with the chain saw)
25 953 100 090 1 Chain gauge
26 953 004 010 1 File handle
27 953 003 070 1 Round le, dia. 4,8 mm
27 953 003 040 1 Round le, dia. 5,5 mm
28 953 003 060 1 Flat le
29 953 009 000 1 File holder 3/8“
29 953 030 030 1 File holder .325“
- 949 000 036 1 Combined can
(for 5l fuel, 3l chain oil)