Why does my Makita EK7650H Cutter engine stop soon after starting?
If your Makita Cutter engine stops soon after starting or the engine speed does not increase, it could be due to insufficient warm-up (perform warm-up operation), the choke lever is set to “ ” although engine is warmed up (set to “ON ”), a clogged fuel filter (clean it), or a contaminated or clogged air cleaner (clean it).
Why is the cutting disc on my Makita Saw not rotating?
If the cutting disc on your Makita Saw isn't rotating, it could be due to a loosened cutting disc-tightening bolt (tighten securely). For abnormal drive system it is recommended to make request for inspection and maintenance.
What to do if the cutting disc of my Makita EK7650H Cutter does not rotate?
If the cutting disc of your Makita Cutter does not rotate, check if the cutting disc-tightening bolt is loosened and tighten it securely.
What to do if the cutting disc does not rotate on my Makita Saw?
If the cutting disc on your Makita Saw isn't rotating, stop the engine immediately. This could be due to a loosened cutting disc-tightening bolt; ensure it is tightened securely. If the bolt is secure and the disc still doesn't rotate, the drive system may be abnormal, requiring professional inspection and maintenance.
Why cutting disc does not stop immediately on my Makita Saw?
If the cutting disc on your Makita Saw doesn't stop immediately, stop the engine immediately. This may be due to high idling rotation, which requires adjustment. If that's not the case, it could be due to a detached throttle linkage or an abnormal drive system, both of which require professional inspection and maintenance.
What to do if Makita EK7650H Cutter engine stops soon after starting?
If your Makita Cutter engine stops shortly after starting, it might be due to insufficient warm-up (perform warm-up operation), the choke lever being incorrectly set after warm-up (set to “ON ”), a clogged fuel filter (clean it), or a contaminated air cleaner (clean it). For abnormal carburetor or drive system, request inspection and maintenance.
What to do if my Makita EK7650H Cutter engine stops soon after starting?
If the engine of your Makita Cutter stops soon after starting or the engine speed doesn't increase, it could be due to several reasons. Make sure you perform a proper warm-up operation. Check that the choke lever is set to “ON ” if the engine is already warmed up. A clogged fuel filter or a contaminated air cleaner can also cause these issues, so clean them. If none of these steps work, the carburetor or drive system may be abnormal, requiring professional inspection and maintenance.
What to do if the cutting disc does not stop immediately on my Makita EK7650H?
If the cutting disc of your Makita Cutter does not stop immediately, it may be due to high idling rotation (adjust it).
Why Makita Saw engine does not stop?
If your Makita Saw engine won't stop, check for a detached connector (attach securely). For abnormal electric system it is recommended to make request for inspection and maintenance.
What to do if my Makita EK7650H Cutter engine stops soon or the speed doesn't increase?
If your Makita Cutter engine stops soon after starting or the engine speed doesn't increase, it could be due to insufficient warm-up; perform a warm-up operation. Also, check that the choke lever is set to “ON ” if the engine is warmed up. A clogged fuel filter or a contaminated air cleaner can also cause these issues; clean these components. For carburetor or drive system abnormalities, request an inspection and maintenance.
General| Engine Type | 4-stroke |
|---|---|
| Displacement | 75.6 cc |
| Fuel Tank Capacity | 1.1 L |
| Blade Diameter | 350 mm |
| Wheel Diameter | 350 mm |
| Cutting Depth | 125 mm |
| Max Cutting Depth | 125 mm |
| Arbor Size | 25.4 mm |
To Next Page
