Makita EK7651H Instruction Manual

28 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

Instruction Manual

EK7650H

EK7651H

Important:

Read this instruction manual carefully before putting the Power Cutter into operation and strictly observe the safety

regulations!

Keep this instruction manual!

Table of Contents

Other manuals for Makita EK7651H

Owner's And Safety Manual92 pages

Technical Information19 pages

Original Instruction Manual236 pages

Questions and Answers:

C
Chloe BrownSep 16, 2025
What to do if my Makita Cutter engine stops soon or the engine speed does not increase?
- J
  Julie HebertSep 16, 2025
  If your Makita Cutter engine stops shortly after starting or the engine speed doesn't increase, consider the following possible causes: * Insufficient warm-up: Perform a warm-up operation. * Choke lever is set to “ ” although the engine is warmed up: Set to “ON ”. * Clogged fuel filter: Clean the filter. * Contaminated or clogged air cleaner: Clean the air cleaner.
D
Diane MeyerAug 26, 2025
Why is the cutting disc on my Makita Saw not rotating?
- J
  john47Aug 26, 2025
  If the cutting disc on your Makita Saw isn't rotating, it could be due to a loosened cutting disc-tightening bolt (tighten securely). For abnormal drive system it is recommended to make request for inspection and maintenance.
C
cindy28Aug 27, 2025
What to do if Makita Saw engine stops soon after starting?
- N
  Nicholas MosesAug 27, 2025
  If your Makita Saw engine stops soon after starting, or the engine speed doesn't increase, it might be due to insufficient warm-up; perform a warm-up operation. Also, ensure the choke lever is set to “ON” once the engine is warmed up. A clogged fuel filter or a contaminated air cleaner can also cause these issues; clean them. For abnormal carburetor or drive system make request for inspection and maintenance.
J
Jason PageAug 27, 2025
What to do if the cutting disc of my Makita Cutter does not rotate?
- C
  christopherbradleyAug 27, 2025
  If the cutting disc of your Makita Cutter does not rotate, check if the cutting disc-tightening bolt is loosened and tighten it securely.
N
Nancy PetersAug 28, 2025
What to do if the cutting disc does not rotate on my Makita Saw?
- P
  Patricia WardAug 28, 2025
  If the cutting disc on your Makita Saw isn't rotating, stop the engine immediately. This could be due to a loosened cutting disc-tightening bolt; ensure it is tightened securely. If the bolt is secure and the disc still doesn't rotate, the drive system may be abnormal, requiring professional inspection and maintenance.
L
lhobbsSep 12, 2025
Why is my Makita Saw vibrating abnormally?
- C
  Christopher ThomasSep 12, 2025
  If your Makita Saw's main unit is vibrating abnormally, stop the engine immediately. This could be due to a broken, bent, or worn cutting disc, which would require replacement. Another cause could be a loosened cutting disc-tightening bolt, which needs to be tightened securely. If neither of these issues is the cause, there might be an abnormal drive system, requiring professional inspection and maintenance.
M
Michael BenitezSep 9, 2025
What causes abnormal vibrations in my Makita Cutter?
- G
  Gail ScottSep 9, 2025
  If the main unit of your Makita Cutter vibrates abnormally, it might be due to a broken, bent, or worn cutting disc (replace the cutter blade) or a loosened cutting disc-tightening bolt (tighten securely).
R
ramirezmichaelSep 10, 2025
What to do if my Makita EK7651H Cutter engine does not stop?
- Z
  zjonesSep 12, 2025
  If the engine of your Makita Cutter does not stop, ensure the connector is securely attached.
S
Sarah LewisSep 3, 2025
Why Makita Saw engine does not stop?
- A
  April LoveSep 3, 2025
  If your Makita Saw engine won't stop, check for a detached connector (attach securely). For abnormal electric system it is recommended to make request for inspection and maintenance.
M
michele52Sep 1, 2025
Why is my Makita Saw main unit vibrating abnormally?
- S
  Steven YoungSep 1, 2025
  Abnormal vibration in your Makita Saw could stem from a broken, bent, or worn cutting disc (replace cutter blade) or a loosened cutting disc-tightening bolt (tighten securely). For abnormal drive system it is recommended to make request for inspection and maintenance.

Makita EK7651H Specifications

General

Depth	780 mm
Width	310 mm
Height	455 mm
Weight	12900 g
Product type	Petrol abrasive saw
Product color	Black, Blue
Sound power level	104.6 dB
Cutting speed	80 m/s
Blade diameter	350 mm
Idle speed (max)	4300 RPM
Cutting depth (90º)	122 mm
Sound pressure level	92.7 dB
Sound level uncertainty	2.5 dB
Engine type	4-stroke engine
Engine power	4.1 hp
Uncertainty K	2 m/s²
Fuel tank capacity	1.1 L
Vibration emission	2.7 m/s²
Engine displacement	75.6 cm³
Arbor diameter	20 mm
Idle speed (min)	9100 RPM
Anti-vibration system	Yes
Engine number of strokes	4
Air filtration stages quantity	5
Motor power	4.5 hp
Power source	Gasoline
Motor rated power	3.3 kW

Related product manuals

Preview: Makita EK7651HX1

Makita EK7651HX1

Preview: Makita EK7650H

Preview: Makita EK7650HX1

Makita EK7650HX1

Preview: Makita EK7301

Preview: Makita EK7300

Preview: Makita EK6100

Preview: Makita EK8100

Preview: Makita PC01

Preview: Makita 4131

Preview: Makita XCC01

Preview: Makita XEC01 Series

Makita XEC01 Series